Frequency Response (±3 dB)

330 Hz – 18 kHz

Coverage Pattern

/64: 60° x 40°, rotatable waveguide

/95: 90° x 50°, rotatable waveguide

Crossover Modes

Bi-amp/Passive switchable

Crossover Frequency

2.3 kHz

Transducer Power Rating (AES)

MF: 350 W (1400 W peak), 2 hrs

HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)

MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL

Bi-amp mode: 

MF: 133 dB-SPL cont avg (139 dB peak) 

HF: 135 dB-SPL cont avg (141 dB peak) 

Passive mode: 

MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m):

Passive mode: 108 dB SPL

Nominal Impedance

8 ohms

Midrange Driver

JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)

108 dB SPL

(Midrange)

High Frequency Driver

JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)

115 dB SPL

(High Frequency)

Enclosure

Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment

13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish

Black DuraFlex™ finish. 

White available upon request.

Grille

Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector

NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications

Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)

548 x 561 x 657 mm 

(21.6 x 22.1 x 25.9 in)

Net Weight

27.2 kg (60 lb)

Optional Accessories

M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.