通过单根 CATx 屏蔽电缆在 100 m（330 ）远的距离上接收带嵌入音频的视频、双向 RS-232 和红外及以太网信号 Extron Vector™ 4K 图像解析度转换技术 可选择的输出分辨率，从 640x480 至 3840x2160
Extron XTP SR HD 4K 是一款图像解析度转换接收器，可通过单根 CATx 屏蔽电缆延长视频、音频、双向 RS-232 和红外控制及以太网信号。它接收来自 XTP 双绞线传输产品的信号，并集成了 Extron Vector™ 4K 解析度转换技术，能提供高达 4K 的可选 HDMI 视频分辨率以及无损的图像品质。该接收器符合 HDCP 2.2 标准，并采用在屏菜单设计、音频解嵌至数字 S/PDIF 或模拟立体声音频输出以及用于房间控制的继电器功能。通过单根屏蔽双绞线电缆可将信号传输至 100 m (330') 远的距离。XTP SR HD 4K 支持远程供电，是需要将信号长距离传输至显示器和品质视频解析度转换的 XTP Systems® 的理想之选。
特性
通过单根 CATx 屏蔽电缆在 100 m（330'）远的距离上接收带嵌入音频的视频、双向 RS-232 和红外及以太网信号
Extron Vector™ 4K 图像解析度转换技术
可选择的输出分辨率，从 640x480 至 3840x2160
符合 HDCP 2.2 标准
HDCP 可视确认 — 当处理 HDCP 加密的内容时，如果视频输出连接至一个不符合 HDCP 标准的显示设备，图像解析度转换器即会输出一个全屏的绿色信号，可以从视觉上立刻确认被保护内容无法显示在此显示设备上
支持远程供电
强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆，以达到更佳的性能表现
用于视音频设备控制的双向 RS-232 和红外插入
支持 HDMI 参数标准，包括高达 10.2 Gbps 的数据速率、高达 12 位的色深、3D 和高清无损的音频格式
全面的 EDID 管理 — 通过 XTP System Configuration 软件访问 EDID Minder，用于设置视频输入 EDID、捕获来自连接显示设备的 EDID 或上传定制的 EDID 文件。正确的 EDID 管理确保信号源和显示设备能轻松地集成至系统中，从而实现优化的系统操作。 可免费下载 EDID Manager 2.0 软件，以提供 EDID 编辑及创建定制的 EDID 文件。
EDID 管理器 (EDID Minder®) 自动地管理已连接设备之间的 EDID 通信
密钥管理器 (Key Mindersup>®) 持续地验证 HDCP 标准，用于快速、可靠的切换
以太网扩展
HDMI 音频解嵌，带模拟立体声和 S/PDIF 音频 输出
音频输出音量调节和静音功能
可选的 HDMI 音频直通
2 个继电器，用于控制房间功能
宽高比控制
图像冻结控制
在屏菜单
输出待机模式
RS-232 控制
兼容 XTP 产品
随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本
Extron Everlast 电源可享受 7 年部件及人工保修
| Video | |
|---|---|
| | Unity |
| | Up to 2560x1600 @ 60 Hz* or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling** * reduced blanking ** bypass mode only |
| | Single-link HDMI (or DVI-D or DisplayPort) |
| | 10.2 Gbps (3.4 Gbps per color) |
| | 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) |
| | RGB and YCbCr digital video |
| | DisplayPort 1.1, DVI 1.0, HDMI 1.4; HDCP 2.2 |
| Interconnection between transmitter and receiver | |
| | 1 female RJ-45 per unit |
| | TIA/EIA T568B |
| | 330' (100 m) using shielded twisted pair or XTP DTP 24 cable |
| | Solid conductor, 24 AWG or better |
| | 400 MHz bandwidth, STP (Shielded Twisted Pair) |
| NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. | |
| Video processing | |
| | 24 bit, 8 bits per color, 297 MHz standard |
| | 16.78 million |
| Video output | |
| | 1 single link HDMI (or DVI-D) |
| | 1 female HDMI type A |
| | 640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008, 2048x12008, 2048x15368, 2560x10808, 2560x14408, 2560x16008, bypass* HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 1920x21601,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8, 2048x21601,2,3,4,5,6,7,8, 3840x21601,2,3,4,5, bypass* 1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz. |
| NOTE * When the output resolution is set to "bypass," the input signal is output without being scaled. | |
| Audio | |
| | Unbalanced output: 0 dB; balanced output: +6 dB |
| | 20 Hz to 20 kHz, ±0.5 dB |
| | <0.1%, 20 Hz - 20 kHz at nominal level |
| | >90 dB, at maximum balanced output (unweighted) |
| | ≤-80 dB @ 1 kHz, fully loaded |
| | >80 dB @ 1 kHz |
| | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz |
| | 16, 20, 24 bit |
| Audio output | |
| | 1 analog stereo, balanced/unbalanced 1 digital audio, embedded with HDMI output 1 digital audio via S/PDIF output connector |
| | (1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video output) 1 female RCA jack (tip, ring) |
| | |
| | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos®, Dolby® TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel |
| | LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel |
| | Analog stereo audio |
| | |
| | 50 ohms unbalanced, 100 ohms balanced |
| | 75 ohms (for S/PDIF output) |
| | >+12 dBV balanced; +6 dBV unblanced |
| | ±0.5 dB channel to channel |
| | -100 dB to 0 dB (control 0 to 100 in 1 dB steps) |
| NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64. | |
| NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
| Communications — receiver | |
| | 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole |
| | 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity |
| | 1 = Tx, 2 = Rx, 3 = Gnd |
| | 1 front panel female mini USB B |
| | USB 2.0, low speed |
| | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
| Communications — external device (pass-through, unidirectional or bidirectional) | |
| | 1 set of proprietary signals on a female RJ-45 jack |
| | RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port) |
| | Up to 115200 baud |
| | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
| | 1 = Tx, 2 = Rx, 3 = Gnd |
| | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz |
| | 3 = Gnd, 4 = IR Tx, 5 = IR Rx |
| | 1 female RJ-45 connector |
| | 10/100Base-T, half/full duplex with autodetect |
| | 2 normally open relays |
| | (1) 3.5 mm captive screw connectors, 4 pole |
| | 24 V, 1 A |
| General | |
| | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
| | |
| | 11.2 watts, 12 VDC |
| | 12.6 wats, 12 VDC |
| NOTE The XTP receiver can be powered either locally by an external power supply or remotely using an optional power injector or XTP CrossPoint matrix switcher. | |
| | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| | Convection, vents on sides and top |
| | |
| | 37.0 BTU/hr |
| | 41.9 BTU/hr |
| Mounting | |
| | Yes, with optional 1U rack shelf |
| | Yes, with optional under-desk mounting kit |
| | Attachable to a projector mount pole with optional PMK 350 kit |
| | Metal |
| | 1.0" H x 8.68" W x 6.0" D (half rack wide) (2.5 cm H x 22.1 cm W x 15.2 cm D) (Depth excludes connectors.) |
| | 1.6 lbs (0.7 kg) |
| | ISTA 1A in carton (International Safe Transit Association) |
| | |
| | CE, c-UL, UL |
| | CE**, C-tick, FCC Class A**, ICES, VCCI |
| | Complies with the appropriate requirements of RoHS, WEEE. |
| NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable. | |
| | 3 years parts and labor |
| | 7 years parts and labor |
| NOTE All nominal levels are at ±10%. | |
| NOTE Specifications are subject to change without notice. | |
