1/1
通过单根光纤传输视频、音频、双向 RS-232 和红外控制及以太网信号 支持分辨率高达 4K 的计算机和视频信号 带可选音频的 HDMI 环通 符合 HDCP 标准 用于视音频控制的双向 RS-232 和红外插入
Extron XTP FT HD 4K 是一款 XTP® 发送器，可通过单根光纤延长视频、音频、双向控制和以太网信号。这款符合 HDCP 标准的发送器可支持分辨率高达 4K、带 4:4:4 色度取样的视频信号。为了简化集成，它采用一路带可选音频控制的 HDMI 环通，能对模拟立体声音频信号进行加嵌。而且以太网扩展及双向 RS 232 和红外插入功能还提供了局域网接入和远程视音频设备控制。通过 OM4 多模光纤可将信号传送至 700 m 远的距离，通过单模光纤可传输至更远 10 km 的距离。XTP FT HD 4K 非常适用于需要安全、长距离地传输像素对像素的视频、音频和控制信号的 XTP Systems®。
特性
通过单根光纤传输视频、音频、双向 RS-232 和红外控制及以太网信号
支持分辨率高达 4K 的计算机和视频信号
带可选音频的 HDMI 环通
符合 HDCP 标准
HDCP 可视确认 — 当处理 HDCP 加密的内容时，如果视频输出连接至一个不符合 HDCP 标准的显示设备，图像解析度转换器即会输出一个全屏的绿色信号，可以从视觉上立刻确认被保护内容无法显示在此显示设备上
用于视音频设备控制的双向 RS-232 和红外插入
以太网扩展
EDID 管理器 (EDID Minder®) 自动地管理已连接设备之间的 EDID 通信
密钥管理器 (Key Minder®) 持续地验证 HDCP 标准，用于快速、可靠的切换
可选的模拟立体声音频输入加嵌
音频输入增益及衰减调整
兼容 XTP 产品
随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本
Extron Everlast 电源可享受 7 年部件及人工保修
| Video | |
|---|---|
| | Unity |
| | Up to 2560x1600 @ 60 Hz* or 4K (4096x2160) @ 24 Hz, UHD (3840x2160) @ 30 Hz, UHD @ 60 Hz with 4:2:0 chroma subsampling * reduced blanking |
| | Single-link HDMI (or DVI-D or DisplayPort) |
| | 8, 10, or 12 bits — subject to the maximum data rate limit |
| | 8.91 Gbps (2.97 Gbps per color) |
| | 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) |
| | RGB and YCbCr digital video |
| | DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4 |
| Video input and loop-through | |
| | 1 single link HDMI (or DVI-D or DisplayPort) input 1 single link HDMI (or DVI-D) loop-through |
| | 2 female HDMI type A: 1 input, 1 loop-through |
| Optical fiber interconnection between transmitter and receiver | |
| | 1 set of proprietary signals |
| | 1 LC fiber connector |
| | |
| NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. | |
| | 10 km (6.21 miles) with singlemode cable |
| | 400 m (1312') with 50 µm OM3 2000 MHz bandwidth laser optimzed multimode cable 700 m (2297') with 50 µm OM4 4700 MHz bandwidth laser optimzed multimode cable |
| NOTE Multimode units are compatible with OM1 and OM2 multimode cables, but at reduced operating distances. | |
| | |
| | 1490 nm, 1550 nm, 1310 nm |
| | 850 nm, 980 nm, 780 nm |
| | 8.5 Gbps |
| | |
| | -6 dBm, typical |
| | -5 dBm, typical |
| | |
| | -15 dBm, typical |
| | -13 dBm, typical |
| | |
| | 9 dB, maximum |
| | 8 dB, maximum |
| Audio | |
| | Unbalanced output: 0 dB; balanced output: +6 dB |
| | 20 Hz to 20 kHz, ±0.5 dB |
| | <0.1%, 20 Hz - 20 kHz at nominal level |
| | >90 dB, at maximum balanced output (unweighted) |
| | ≤-80 dB @ 1 kHz, fully loaded |
| | >80 dB @ 1 kHz |
| | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz |
| | 16, 20, 24 bit |
| Audio input | |
| | 1 analog stereo, balanced/unbalanced or 1 digital audio, de-embedded from HDMI |
| | (1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video input) |
| | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, analog stereo |
| | 10k ohms, unbalanced, 20k ohms balanced |
| | +4 dBu (1.23 mVrms) balanced, -10 dBV (316 mVrms) unbalanced |
| | +21 dBu balanced, +15 dBu unbalanced |
| | -18 dB to +24 dB, 1 dB steps, adjustable |
| NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
| Communications — transmitter | |
| | 1 front panel female mini USB B |
| | USB 2.0, low speed |
| | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
| Communications — external device (pass-through, unidirectional or bidirectional) | |
| | RS-232 (+5 V) via a (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with the IR control port) |
| | Up to 115200 baud |
| | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
| | 1 = Tx, 2 = Rx, 3 = GND |
| | (1) 3.5 mm, captive screw connector, 5 pole (uses 3 poles) (connector is shared with the RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz |
| | 3 = GND, 4 = IR Tx, 5 = IR Rx |
| | 1 female RJ-45 connector |
| | 10/100Base-T, full duplex with autodetect |
| General | |
| | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
| | |
| | 8.1 watts |
| | 10 watts |
| | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| | Convection, vents |
| | |
| | 26.2 BTU/hr |
| | 32.8 BTU/hr |
| Mounting | |
| | Yes, with optional 1U high rack shelf |
| | Yes, with optional under-desk mounting kit |
| | Metal |
| | 1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.) |
| | 1.6 lbs (0.7 kg) |
| | ISTA 1A in carton (International Safe Transit Association) |
| | CE, c-UL, UL, IEC 60825-1, C-tick, FCC Class A, ICES, VCCI Complies with the appropriate requirements of RoHS and WEEE. |
| | 3 years parts and labor |
| | 7 years parts and labor |
| NOTE All nominal levels are at ±10%. | |
| NOTE Specifications are subject to change without notice. | |
感谢您的关注，当前客服人员不在线，请填写一下您的信息，我们会尽快和您联系。
