通过单根 CATx 屏蔽电缆将 DisplayPort、HDMI 或 VGA 视频、音频、双向 RS-232 和红外及以太网信号传输至 100 m (330 ) 远的距离 支持分辨率高达 4K 的计算机和视频信号
XTP T USW 103 4K 是一款 3 路输入发送器，可通过单根 CATx 屏蔽电缆延长 DisplayPort、HDMI 或 VGA、音频、双向控制及以太网信号。这款符合 HDCP 2.2 标准的发送器支持分辨率高达 4K 的视频信号，并提供一路本地 HDMI 输出。它具有各路输入之间可选择优先级的自动切换功能，便于在无人值守的环境进行操作。它可将输入的模拟信号数字化，单独的模拟立体声音频还可加嵌到输出信号。以太网扩展及双向 RS-232 和红外插入功能方便了局域网接入和远程视音频设备控制。通过屏蔽双绞线电缆可将信号传输至 100 m (330') 远的距离。XTP T USW 103 4K 是需要从远端进行长距离传输的 XTP ystems® 的理想之选。
特性
通过单根 CATx 屏蔽电缆将 DisplayPort、HDMI 或 VGA 视频、音频、双向 RS-232 和红外及以太网信号传输至 100 m (330') 远的距离
支持分辨率高达 4K 的计算机和视频信号
HDMI 输出可对选定的输入提供本地显示
符合 HDCP 2.2 标准
强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆，以达到更佳的性能表现
1 路 DisplayPort、1 路 HDMI 和 1 路 VGA 输入
各路输入之间的自动切换
用于视音频设备控制的双向 RS-232 和红外插入
支持 HDMI 参数标准，包括高达 10.2 Gbps 的数据速率、高达 12 位的色深、3D 和高清无损的音频格式
EDID 管理器 (EDID Minder®) 自动地管理已连接设备之间的 EDID 通信
密钥管理器 (Key Mindersup>®) 持续地验证 HDCP 标准，用于快速、可靠的切换
HDCP 可视确认 — 当处理 HDCP 加密的内容时，如果视频输出连接至一个不符合 HDCP 标准的显示设备，图像解析度转换器即会输出一个全屏的绿色信号，可以从视觉上立刻确认被保护内容无法显示在此显示设备上
以太网扩展
可选择的模拟立体声音频输入嵌入
音频输入增益及衰减
RS-232 控制
兼容 XTP 产品
随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01
Extron Everlast 电源可享受 7 年部件及人工保修
| Video | |
|---|---|
| | |
| | Unity |
| | Up to 1920x1200* or 1080p (HDTV) * reduced blanking |
| | |
| | 10.2 Gbps (3.4 Gbps per color) |
| | 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) |
| | Up to 2560x1600 @ 60 Hz*, or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling * reduced blanking |
| | RGB and YCbCr digital video |
| | DisplayPort 1.1, DVI 1.0, HDMI 1.4, HDCP 1.4 and 2.2 |
| | |
| | 10.8 Gbps (2.7 Gbps per lane) |
| | 300 MHz |
| | Up to 2560x1600 @ 60 Hz*, or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, * reduced blanking |
| | RGB and YCbCr digital video |
| | DisplayPort 1.1, HDCP 1.3 |
| NOTE Only Single Stream Transport (SST) is supported. | |
| Video input | |
| | 1 analog RGBHV 1 single link HDMI (or DVI-D or DisplayPort) 1 DisplayPort |
| | 1 female 15-pin HD 1 female HDMI type A 1 female DisplayPort |
| | 0.7 Vp-p for RGB |
| | 0.3 V to 1.45 Vp-p |
| | 75 ohms |
| | 30 kHz to 100 kHz |
| | 24 Hz to 120 Hz |
| Video output — switched, local | |
| | 1 single link HDMI (or DVI-D) |
| | 1 female HDMI type A |
| Shielded twisted pair interconnection | |
| | 1 female RJ-45 per unit |
| | TIA/EIA T568B |
| | 330' (100 m) using shielded twisted pair or XTP DTP 24 cable |
| | Solid conductor, 24 AWG or better |
| | 400 MHz bandwidth, STP (shielded twisted pair) |
| NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. | |
| Audio | |
| | |
| | Adjustable, -18 dB to +24 dB |
| | Unbalanced output: 0 dB; balanced output +6 dB |
| | 20 Hz to 20 kHz, ±0.05 dB |
| | 0.1% @ 1 kHz at nominal level |
| | >90 dB, at maximum output, balanced (unweighted) |
| | ≤-80 dB @ 1 kHz, fully loaded |
| | >80 dB @ 1 kHz |
| | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz |
| | 16, 20, 24 bit |
| Audio input | |
| | 1 analog stereo, unbalanced or 1 digital audio, de-embedded from HDMI 1 digital audio, de-embedded from DisplayPort |
| | 1 female 3.5 mm mini stereo jack 1 female HDMI type A (shared with video input) 1 female DisplayPort (shared with video input) |
| | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, analog stereo |
| | >10k ohms, unbalanced, DC coupled |
| | -10 dBV (316 mVrms) unbalanced |
| | +7 dBv unbalanced |
| NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
| Audio output | |
| | 1 digital audio, embedded with HDMI output |
| | 1 female HDMI type A (shared with video output) |
| | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel |
| NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
| Communications — switcher | |
| | 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole |
| | 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity |
| | 1 = Tx, 2 = Rx, 3 = Gnd |
| | (1) 3.5 mm captive screw connector, 4 pole |
| | 1 = input 1, 2 = input 2, 3 = input 3, 4 = GND |
| | 3 tally outputs on (1) 3.5 mm captive screw connector, 4 pole |
| | 1 = Input 1 tally ground, 2 = Input 2 tally ground, 3 = Input 3 tally ground, 4 = +5 V |
| | 1 front panel female mini USB B |
| | USB 2.0, low speed |
| | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
| Communications — external device (pass-through, unidirectional or bidirectional) | |
| | RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with the IR control port) |
| | Up to 115200 baud |
| | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
| | 1 = Tx, 2 = Rx, 3 = Gnd |
| | (1) 3.5 mm, captive screw connector, 5 pole (uses 3 poles) (connector is shared with the RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz |
| | 3 = GND, 4 = IR Tx, 5 = IR Rx |
| | 1 female RJ-45 connector |
| | 10/100Base-T, half/full duplex with autodetect |
| General | |
| | External Input: 100 to 240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
| | |
| | 16.5 watts, 12 VDC |
| | 18.2 watts, 12 VDC |
| NOTE The XTP T USW 103 4K requires a locally connected power supply. | |
| | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| | Convection, vents on sides and top |
| | |
| | 55.3 BTU/hr |
| | 61.1 BTU/hr |
| Mounting | |
| | Yes, with optional 1U high rack shelf |
| | Yes, with optional under-desk mounting kit |
| | Metal |
| | 1.66" H x 8.68" W x 8.5" D (half rack wide) (4.2 cm H x 22.1 cm W x 21.5 cm D) (Depth excludes connectors.) |
| | 2.7 lbs (1.2 kg) |
| | ISTA 1A in carton (International Safe Transit Association) |
| | |
| | CE, c-UL, UL |
| | CE, C-tick, FCC Class A, ICES, VCCI |
| | Complies with the appropriate requirements of RoHS, WEEE. |
| | 3 years parts and labor |
| | 7 years parts and labor |
| NOTE All nominal levels are at ±10%. | |
| NOTE Specifications are subject to change without notice. | |
